Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Ball Mount 67 Designs for Yaesu FTM-400
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a 20mm ball adapter I made to work with my 67 Designs dash mount in my Jeep to install the radio controller head for my Yaesu FTM-400XDR VHF/UHF transceiver. It's designed for using an M5x20 machine screw with a 10mm wide lock washer. It probably would also work with Ram mounts which have similar clamps, but that's not tested. I made the stem a little thicker to add strength for holding my radio controller in bumpy situations. I didn't use supports during printing which may account for the bit of roughness on the lower half of the ball, but I figure the supports would leave just as many artifacts to clean up, so this was easier. I get the same with all ball mounts I've tried printing. I make no claims as to the durability or suitability of this design and makers assume all risk of its printing and use. FTM-400 users, the M5x20 screws and lock washers are included with the radio in the accessories bag. I use one lock washer inside and one lock washer outside to secure the control head. Update: I just added a 1-inch ball version. Uses the same M5x20 screw with 10mm wide lock washer. This seems to be a more common size for Ram mounts.
Compatible Vehicles
This part is marked as universal-fit. Confirm dimensions, mounting points, and clearances on your vehicle before printing.
Originally published on thingiverse.com by Max Becker (Maxheadspace) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
