Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Gear Indicator Holder for GS500E Neutral Light Canal
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is the Mount for a Gear Indicator i bought from Amazon (https://www.amazon.de/gp/product/B08CZHHTLJ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 ) to mount the Indicator in the Same spot the Neutral Indicator Light is on the Cockpit. I printed it With TPU Filament so its Flexible enough to let the cable pushed through and be fittet in the Hole after removing the Green Plastic cover and the Bulb on the back end. I used a Controlled Heat Gun to soften the Hot Glue on the Gear Indicator to displace the Cable Position to fit the Mounting Position. Also i Had to extend The Wire for The Positive Connection to reach into the headlight. Support is Included in the File. Just Print in the Position it is in the file. Infill ~20-40% Material TPU Print Time ~30-40 Minutes at 60mm/s.
Originally published on thingiverse.com by Steven Reese (cpt_antimate) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
