05-07 Ford Escape iPhone 5/6 cupholder drop in insert - image

Files (2)

ford_escape_tray.stl

STL

57.6 KB

ford_escape_tray_wedge.stl

STL

884 B

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ford_escape_tray.stl	Cover / cap	57.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
ford_escape_tray_wedge.stl	Cover / cap	884 B STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

05-07 Ford Escape iPhone 5/6 cupholder drop in insert

0 downloads1.1K views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

2 hosted model files

STL

Material

PETG or ASA for durability

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for strength and minimal weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This drop in insert for the *05-07* Ford Escape holds your phone at a comfortable viewing angle in the front forward cup holder. The insert fits right into the cup holder. This holder is made for phone less than 7.5mm in width. Some phones that will fit are the iPhone 6 and iPhone 5. This model consists of two parts: 1. Base insert 2. Wedge The wedge is inserted into the base insert to support the phone at a viewing angle. The wedge can be removed to accommodate a bottle for normal cup holder use. The insert should work with the equivalent Mazda Tribute and Mercury Mariner year models.