Files (2)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
1din car stereo front plate for volvo xc90 I (2006)
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL + 3MF
Material start
PETG or ASA for durability in a car environment
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a stereo front plate adapter for Volvo xc90, 2006 model. For one full size din slot (lower) no modifications to center console is needed. The upper din slot is not full size (max depth < 100 mm) due to center console mounting bracket. The size fits just to Ultimaker 3 corner to corner (settings provided in.3mf). The scad model provides the dimensions and can be modified to dual din easily. There will be a 5 mm gap between the front panel and the climate control panel as the cube at the back is missing square holes. However, there is room at the top for the panel to slide upwards. Issues/TODOs: - Din slots are really tight: increase din slot hole height and width by 0.5 mm - Square holes for support brackets missing at the bottom: extend the surface (not the block on the back) downwards by 5 mm (or cut square holes for mounting brackets to the lower back side) - No mounting supports: Commented out in.scad as they don't fit to print area.
Compatible Cars
Originally published on thingiverse.com by Juha Koivisto (jhkoivis) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Radio console for 10 inch Radio plate
2010-2014 Kia Sportage Center console
05-14 Mustang center console cover
Kia Sportage 2022 center console (Mittelkonsole) inlay
2011-13 Ford Edge Coin Tray
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
