Files (7)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
1st Gen Mazda 3 MPS / Mazdaspeed 3 Model
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
7 hosted model files
STL
Material start
PETG or ASA for durability
Saved part guidance
Strength start
20-30% infill for a balance between weight and strength
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
This is a model of the 2009 mazdaspeed 3, or as we know it in europe, the 2009 Mazda 3 MPS. This is a stationary model. The wheels do not spin or turn. but feel free to remix and get something to work. The car has a length of 200mm and all other parts are made to fit at this size. so you might need to tweak the other parts if you want it smaller or bigger. The model consists of the car body itself, oem rims + tires, front and rear brakes, and 2 different sized axles to get a flush look. Assembly goes like this: Rims are glued into the tires, brakes into the rims, axles with the slim side into the backside of the brakes. When the glue is set just glue them into the wheel wells. Make sure the brakes are oriented correctly and the heights match.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
