2013 Ford Flex 8 or 12 oz slim can cup holder adapter

0 downloads44 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or TPU for durability and flexibility

Saved part guidance

Strength start

20-30% infill for a balance between weight and stability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I got tired of my smaller canned beverages sloshing around and causing spills. The cup holders are ~87.6mm (3.4inch) diameter, far too large to properly support smaller than standard cans. My MtnDew Kickstart, IZZE juice, or other 8.4oz (248ml) or 12oz (355ml) cans needed support, so I slapped this together. I'm sure it may work well for other years or other cars also. The ring outer diameter is 87.2mm and the inner can hole is 60mm (2.4inch) to support a decent variety of small cans. It slips into the cup holder and stops just above the illuminated ring if your vehicle is equipped with such. A light, fast, easy print. I recommend a TPU filament for shock absorbing if that's your thing. Also easily stores in glove box or other organization area. I made a quick one out of PLA and have been using it for two days, worked out great! EDIT: My wife also says it makes a great cupcake holder. EDIT: Decided to make a smaller addition for other things. Maybe you want to drop a flashlight in there and make sure it points straight up for some reason..idk. Or some other slimmer thing measuring under 30mm diameter.