Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
2018 VW TIGUAN USB floating shelve
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
If you use a small size USB pendrive, it is very difficult to plug and remove because the original socket position are too deep in the dashboard. I created a floating shelve, with two socket of USB and the two side you can store your phone if you want. Have to buy a short USB extender cable. Only the middle top side glued (3M double side tape) on to the dashboard, the side cannot touch the plastic. (there is avoid the heat expanations isue and the rattling sounds also) More then one year I use in my car. I printed PETG, but also good ABS and ASA as well. The cable with I use you can buy here: https://www.pcx.hu/gembird-usb-a-m-f-adatkabel-hosszabbito-0-15m-fekete-ccp-usb2-amaf-0-15m--00954652
Compatible Vehicles
Originally published on thingiverse.com by Stewe King (kingstewe) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
