3.5L_Ford_mustang_Cam_Holder_plates.stl

STL

32.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.24

Filament only at roughly $24/kg PETG / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
3.5L_Ford_mustang_Cam_Holder_plates.stl	Mount / bracket	32.3 KB STL	9g $0.22	10g $0.24	22g $0.52	Ensure proper orientation in the slicer for optimal printing and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

3.5L Ford mustang Cam Holder plate

0 downloads5 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

3.5L Ford mustang Cam Holder plate. You will need two (2) of these to perform the job.

Published Jul 9, 2026Updated Jul 9, 2026

Originally published on thingiverse.com by Audio Aholic (PrintMechanic) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.