3000GT Shifter Bushing (Center Console Only) - image

Files (4)

Metal_Sleeve_Bottom.stl

STL

122.1 KB

Metal_Sleeve_Top.stl

STL

122.1 KB

Solid_Version_Bottom.stl

STL

116.4 KB

Solid_Version_Top.stl

STL

116.0 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

4 model files

Material plan

ABS

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

40% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Center Console

3000GT Shifter Bushing (Center Console Only)

0 downloads93 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

4 hosted model files

STL

Material start

ABS

Saved part guidance

Strength start

medium to high infill for durability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Engine-bay exposure — use rated material or OEM

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Okay. So this is a set of shifter bushings for the 3000GT and Dodge Stealth, specifically the four bushings used to hold down the entire shifter mechanism to the frame as it sits inside of the center console area. These are not for the two shifter bushings in the engine bay. The two versions shown allow the option to use the existing metal sleeve that is found in the OEM bushings, however, I have designed a version that is stand-alone and does not use these sleeves. In my findings, the OEM original sleeve is 9.6mm on the inner diameter, but the bolt that ties all of this together is only 8mm, allowing for a 1.6mm wobbly inside of the connection. I strongly disagree with that flaw in the original design and as such, my stand-alone set is tighter and allows for less wobble, thus meaning less chance of the entire shifter from slipping left and right and forward in back before shifting occurs. This effectively tightens up the feel of shifting gears. ABS is a must to prevent wear over time.