Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
300ZX 3rd Brake Light stud retainer
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Back at it for another 300ZX part! This is a Stud retainer for the 3rd brake light bar on a 1996 Nissan 300ZX. I was replacing the bar that was broken, really common problem on these, and ended up twisting the stud inside of the plastic retainer. Had to destroy the retainer to get the nut removed. Figured I would make one instead of ordering and waiting for another. There are only two of these on this part. I printed multiples in case I messed one up putting it back together. I did not need glue or anything to hold the stud in place as it was a really tight fit. Printed without support by flipping the part on its end. Very little sagging due to the very short distance that needed bridged.Print settings were 3 shell,.2 layer height, no support, and 85% infill. Let me know of any questions or concerns. Hope it helps =).
Compatible Vehicles
Originally published on thingiverse.com by Richard Linderman (Manicska) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
