Files (6)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
98 Chevy Silverado 3500 Factory dash trim for rocker switches
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
6 hosted model files
STL
Material start
PETG or ASA for durability in a car environment
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
In the last few years, I wanted to install my rocker switches to be part of the factory insert look, cutting it out by hand just wasn't as good. Now that I have a 3d printer, it made it all possible and in any configuration possible.This one is where the cargo light and 4x4 switch is located, mine is a non 4x4. I printed mine a little different. I have also included a solid piece. as well as a 3 rocker switch. The dimensions are very close if not accurate, The last 2 pictures compare the genuine part verses the printed part. The Blank insert is designed by BiscuitsOnTheFloor, I got it from here https://www.thingiverse.com/thing:2202388 This is still a work in progress, as I have not yet tried to insert it in my dash yet. I will be working on another insert later on, which is the one below it. If you have any requests for a different configuration, send me a message and I will make one for you.
Compatible Cars
Originally published on thingiverse.com by Night Stone (Night_Stone) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
GMT900 dash gauge pod insert 2007 - 2013 Chevrolet GMC Silverado/Sierra
Accessory Switch Panel for Silverado/Sierra
Chevrolet Sonic/Aveo instrument Gauges Holder/Case
Chevy Colorado/GMC Canyon Front Pocket AMPS Dock
82-92 Camaro Reversed Double Din Plate
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
