Additions for Speedo Holder for Mini Cooper vehicles!

0 downloads49 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

Source link only

No hosted model files

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability, with 1.6-2 mm walls

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

These are the additions to the main thing, The ULTIMATE MINI Cooper Phone Mount: (https://www.thingiverse.com/thing:2236035) Most of these are phone holders that are mounted with four M3 bolts to the arms of the central holder. The phone is supposed to be inserted from the top, and there is a gap for the charging cable on the bottom. Additionally, here you can find the ANTLERS that stick out on the top of the speedometer, showing that you have a really evil MINI:) The original part is presented in.STEP format which can be imported into most 3D design software and modified to your needs. The main things you want to adapt to are the thickness of the bottom part of the phone and its width. All other parts were made in 123D Design, and if you want to modify those slightly, please use 123D, as it is an amazing piece of software.