Files (9)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Aftermarket reverse camera case for Dacia Logan 2
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
9 hosted model files
STL + 3MF + STEP
Material start
PETG or ASA for the outer case and TPU for the spacer
Saved part guidance
Strength start
100% infill for the spacer and a moderate infill (e.g., 20-50%) for the outer case
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Aftermarket reverse camera case/mount that fits the Dacia Logan 2. Was printed in TPU for easier installation and for absorbing vibrations. Spacer that the camera attaches to is from TPU, the outside one is from PETG, PETG so the screws have something stiff to screw on. 100% infill on everything.
Compatible Cars
Originally published on thingiverse.com by Adrian Valentin (Adrian96) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
dacia stepway reverse camera holder adapter
Honda civic 2017
Honda Civic
Golf ball gear knob version 2
Volkswagen Golf
Honda Civic Si Coupe (EM1)
Honda Civic
2016 Chevrolet Camaro SS with V-Slot Wheels
Chevrolet
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
