Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| alzorcentercapbackplate.stl | Cover / cap | 960.8 KB STL | 27g $0.66 | 30g $0.71 | 65g $1.57 | Use PETG / ASA; check sealing faces and verify in slicer. |
| alzorcentercaptwist.stl | Cover / cap | 29.7 MB STL | 109g $2.62 | 119g $2.85 | 260g $6.24 | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Alzor 55mm center cap
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
Alzor center caps do not look the best... here are some "twist on" center caps for Alzor wheels, with the old Audi logo in the center. It became difficult to use the typical clips to attach the caps to the wheels as they kept breaking, instead I designed a cap that screws into itself and attaches that way. With some Loctite, these caps stayed in place for a 6+ hour road-trip.
Compatible Cars
Originally published on thingiverse.com by Alex Anthony (anthonyaudi) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
