Amazon fire tablet [7|8] car holder - Opel Astra H - image

Files (5)

tabledholder_fire8_arm.stl

STL

245.5 KB

tabledholder_base_firetablet.stl

STL

57.7 KB

tabledholder_firetablet_fixingbolts.stl

STL

181.3 KB

tabledholder_base_astraH.stl

STL

102.4 KB

tabledholder_fire7_arm.stl

STL

245.3 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

5 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Phone Mounts

Amazon fire tablet [7|8] car holder - Opel Astra H

0 downloads60 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

5 hosted model files

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 2-3 walls for durability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This fire tablet car holder was designed to hold a firekids tablet 7 and 8 inkl the bumper in an Open Astra H. It can be used in every car with the same sizes: - space between the 2 headrest poles (space between both poles): 137mm - 165mm (hint more than 137mm: could be that you can't use screws - i never used some but you could if you want) - max 11mm diameter for the poles Print list: 1x tabledholder_base_astraH.stl 1x tabledholder_base_firetablet.stl 1x tabledholder_firetablet_fixingbolts.stl (2 pieces) then you have to chose weather you like to print the 7" or 8" arms 2x tabledholder_fire7_arm.stl OR 2x tabledholder_fire8_arm.stl you further need the following M4 screws: 1x M4x45mm, 2 washer and 1 M4 nut to hold the firetablet base to the astra base 4x M4x25mm to put the arms to the firetable holder 2x M4x25 to put the fixing bolts to the arms Hint: I used colorfabb ngen to print this. Keep im mind that it can be very hot in cars in summer so you should use heat resistant materials like ABS,PETG.. etc..