Files (1)

Audi_A3_8P_Latch.stl

STL

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Accessories

Audi A3 8P Latch

1 downloads605 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PLA

Publisher-saved recommendation

Strength start

30% infill

Publisher-saved setting

Orientation / supports

Likely required

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Low-heat or decorative use only

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Alfred

Verified

Description

The original file is broken and did not fit exactly to my A3 8P, so I create it new.

Print Settings Printer brand: Creality

Printer: CR10S PRO

Rafts: No Supports: Yes Resolution: .12

Infill: 30

Filament brand: --

Filament color: black

Filament material: PLA; PETG

Notes: I have printed it with 0.12mm layer height, works perfect for me.

Bill of Materials

Hardware, filament, and supplies to check before printing this part.

PLA filament

Qty Enough for one print

Required

Match diameter and temperature range to your printer before ordering.

Buy / source

Some purchase links may become affiliate links. Confirm dimensions, fitment, material limits, and safety before buying or installing anything in a vehicle.