Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Audi Q5 iPhone XS Max Holder
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability and heat resistance
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
supports likely
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
A basic iPhone XS Max cradle made to fit in the wedge opening on the Audi Q5 console. The XS Max is too big to fit in there as designed, and then you can't see it well. The object has a channel made in it for a normal cable to run through from either direction, and go to the cradle part for connecting the USB cable. The angle is flat; will probably remix this later to angle the cradle towards the driver more for visibility. But the important thing is I get a cupholder back! You absolutely need to print this with supports of some sort. In Cura, I used "touching Buildplate", with a support overhang angle of "10". Support pattern of "lines". It came apart very cleanly and without issue. (Note: the picture shows an iPhone XS, not Max, in the holder).
Compatible Cars
Originally published on thingiverse.com by Mitch Morice (r3wind) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
iPhone XS Max phone holder for Audi Q5
Audi A3 8P 2007 - 10.1 Tablet Holder
Audi A3 8V Phone Holder
AUDI A3 8L Smartphone holder
Oneplus 7TPRO Phone holder Audi A3 8P
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
