Files (3)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Badges for Mini Cooper vehicles
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
3 hosted model files
STL
Material start
PETG or ASA for outdoor durability
Saved part guidance
Strength start
20-30% infill for a balance between weight and durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
These are Mini Cooper car badges for grills and license plates. They commonly are found on cars in motoring clubs. It is like a bumper sticker, but round and less permanent. This is not just a Mini thing, but also used on Jeeps, BMW and Land Rover clubs. These badges were designed to work with the badge holder designed by PunkGeek, but will work with most 3" badge holders. https://www.thingiverse.com/thing:3245549 I was inspired by PunkGeek's OctoCat badges: https://www.thingiverse.com/thing:3272065 There are three designs included - A blank template - A Skull and Crossbones - A Hello-My-Name-Is sticker - This is designed to be edited to include the name of your car. These badges, like PunkGeek's, are designed to be paused during the print to change the filament color, allowing the end result to be multi-colored. Happy Motoring!
Compatible Cars
Originally published on thingiverse.com by Christopher Hudson (WasabiSlide) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Badge holder for 3rd gen adorable motoring vehicles.
Mini Cooper SE F56 LCI 2022 logo emblem badge decals
Wheel center cap for Mini Cooper vehicles
Wheel Centre Cap for Mini Cooper Vehicles
Leyland Grill Badge for Mini Clubman vehicle
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
