Bronco 6G Pod Light Bracket
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a pod light bracket for the Ford 6G Bronco. I've included a DXF for the top plate to be made out of.250" aluminum or steel. Two bottom 3-D print spacer STL's. The short one is for the threaded quarter inch top plate. The taller extended version is to be used with a backing nut. I have added new spacers with.030 removed from the step. Check to see which one will work best. The two Bronco bolts have different head and torx (T25 and T30) size but the thread size is the same for both M6 x.1 mm the T 30 is longer than the T 25, if you swap the screws with the holes they came in you don't need to replace your bolts. If you want to replace your bolts they are M6 x.1 mm x 25 mm long will work. *Thingiverse has a problem with downloads. So go to the thing files and download them individually for best success.*
Compatible Vehicles
Originally published on thingiverse.com by Jim Audette (vlxjim) · License: CC BY-NC
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
