Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Button for hand brake lever citroen c3 picasso - tasto leva freno a mano
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I've lost the original button of the hand brake lever, so I designed and printed a new one. My car is a citroen c3 picasso (model year 2013), but i think it'll fit on other citroen models (but I can' be sure!). The printed button has to be inserted on the smaller lever inside the hand brak lever by a little pressure, be careful to mount it right with the logo in the right position, so that also the internal mount is in the right position. I've printed it in PLA+, but it's better to use materials that can withstand higher temperatures and uv rays (such as ABS, ASA, PETG and others). Ho perso il tasto originale della leva del freno a mano, quindi ne ho progettato e stampato uno nuovo. La macchina è una citroen c3 picasso (anno 2013), ma penso che monta su anche altri modelli citroen (non ne ho la certezza!). Il tasto va inserito sul leverino interno alla leva del cambio con una leggera pressione, bisogna fare attenzione al verso di montaggio in modo che il logo sia nella giusta posizione, così anche la sede interna sarà posizionata correttamente. Ho stampato il tasto in PLA+ ma è meglio utilizzare materiali che resistono a temperature più elevate e ai raggi uv (materiali come ABS, ASA, PETG e altri).
Compatible Vehicles
Originally published on thingiverse.com by gabriele lamperti (Gabbo27) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
