Files (1)

Dash-Mount-v1.0.stl

STL

376.0 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

10% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Dashboard

C7 Corvette dash mount

0 downloads67 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA for better heat resistance

Saved part guidance

Strength start

Higher infill density (0.4-0.6) with strong pattern for durability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a rugged dash mount for a 2014-2019 C7 Corvette. It uses the AMPS screw pattern to attach accessories and I used ProClip mounts to attach a RasPi running OpenAutoPro. I used PLA because it's all I have but the design is reinforced and using higher walls, infill, and a stronger infill pattern it has survived the Florida summer heat so far. I used heat inserts to screw into for support. The metal loops are garage door visor holders cut shorter for the portion that goes under the dash. I put some felt on the bottom to protect the dash from it sitting on it. Garage Door Remote Visor Clips https://smile.amazon.com/gp/product/B07RK4CBVV Heavy Duty Tilt-Swivel https://www.proclipusa.com/product/tilt-swivel-mount-with-amps-face-plate-heavy AMPS Device Mounting Adapters https://www.proclipusa.com/product/amps-device-mounting-adapter