Car Cover trunk Attachement - Nissan Micra - image

Files (2)

attach_lower_part_v8.stl

STL

1.2 MB

attach_upper_part_v14.stl

STL

311.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
attach_lower_part_v8.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
attach_upper_part_v14.stl	Printable file	311.5 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Car Cover trunk Attachement - Nissan Micra

0 downloads46 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

2 hosted model files

STL

Material

PETG or ASA for durability in outdoor conditions

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between strength and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Hi, It's my first project publish here so don't hesitate to ask for more details if there aren't enough yet;) As my girlfriend and I have both a Nissan Micra, in both of them the attachement part of the car trunk cover was missing. I did ask for a new one at Nissan but such a tiny part does'nt even exist in the catalog! So I just made it ^^ Thank also to a friend of mine, Crixos who did the first draw of the bottom part that looked already amazing. --------- There is two part, the bottom and the upper one, feel free to use one or both of them to repair your trunk cover. I give the.stl but also the.f3d for any modification. I couldn't upload the complete attachement.f3d file (available in the picture) but just import both part to control that every thing fits. Right now it does, so it's more if you want to check your modification