Files (5)

cupholder_v3_thick_voronoi.stl

STL

26.5 MB

cupholder_v2_solid.stl

STL

160.4 KB

cupholder_v2_thin_voronoi.stl

STL

14.6 MB

cupholder_v4_solid_4point5OD.stl

STL

161.3 KB

cupholder_v5_solid_4point5OD.stl

STL

185.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

5 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Accessories

car cupholder adapter

0 downloads151 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

5 hosted model files

STL

Material start

PETG or ASA for durability in car conditions

Saved part guidance

Strength start

20-30% infill for a balance between strength and material usage

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

This will fit a Nalgene, most coffee cups, pint-size mason jars and also most phones and tablets. I've tried it in a few vehicles and it fits most of the car cupholders but is too fat for in-door cupholders. My favorite so far is the solid one. It is a little pointy though, so a little edge sanding is a good idea. The solid one uses the most material but prints the fastest. The thin voronoi uses the least material but takes ~12 hours on my prusa. No supports needed for any of these if you print with the skinny side down (as oriented in the stl). update 4/22/22: V4 is a little larger to so it can hold even bigger Takeya and maybe Hydro Flask thermos. V4 internal diameter is ~102 mm.

Published Mar 8, 2026Updated Aug 8, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Hyundai

4.5K

View & download STL files