Files (12)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
CCV Delete Hose Adapter Kit for BMW vehicles
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
These adapter couplers are intended to allow You to plumb the outlet on the valve cover of your M52 / S52 engine through to the intake manifold CCV stock location, or intake elbow vacuum using 10, 12, or 19mm (3/8", 1/2", or 3/4") hose. The smaller sizes fit most budget catch cans and some readily available in-line PCVs, including the M/E Wagner adjustable dual-flow valve, are easier to route, take up less space than, and are considerably cheaper than 3/4"-1" when it comes to proper oil resistant vacuum line (fuel hose). The valve cover adapter should fit snugly in the valve cover and sit tight with a couple of 20mm o-rings (a bit smaller ones will stretch too). The manifold adapter should fit snugly in the original CCV grommet, or CCV provision in a M50 manifold kit if already installed. The Manifold Plug can be used to plug the CCV grommet/provision if drawing vacuum from elsewhere, such as in forced induction applications, or just a draft tube open to atmosphere. I'm trying ABS first, and it's working well so far. I plan on eventually printing in fiber-reinforced nylon if it can't handle the heat or oil. Need to plug the extra hole in the ASC delete intake boot? Check out my Intake Tube / Hose Plug for BMW vehicles: https://www.thingiverse.com/thing:2932131
Compatible Vehicles
Originally published on thingiverse.com by Maciej Wojtulewicz (macelius) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
