Files (2)

C300_Reinforced.stl

STL

1.3 MB

Chrysler300C_Clip.stl

STL

1.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

35g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.83

Filament only at roughly $24/kg PETG / ASA

Print time

59m–1.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
C300_Reinforced.stl	Printable file	1.3 MB STL	32g $0.76	34g $0.83	75g $1.81	Ensure proper orientation in slicer for optimal printing
Chrysler300C_Clip.stl	Clip	1.3 MB STL	32g $0.76	35g $0.83	76g $1.82	Ensure proper orientation in slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Chrysler 300 C sunvisor clip

0 downloads43 views0 likes

Shared by

Alfred

Verified

Description

¡¡¡UPDATED!!! This piece replaces the sun visor clip of a Chrysler 300c. It fulfills its function perfectly. I hope it will be useful to you more. In my case I have finished sanding with 240 grit, primer for plastics and beige paint for car interior. Reinforced and adjusted.