Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Knobs/Buttons

Citroen C4 5S Gear Shift Knob

0 downloads201 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Albert Koey (albertkoey)

Description

A replacement gear shift knob for Citroen C4 5S 1587CC (2006 year) I made this for my colleague and he is using version 1a now. It fits right into the shift shank. The knob won't rotate around the shank as the grooves fits nicely into the 3 ridges on the shank. While the knob can be easily removed if you pull it out, it shouldn't affect your driving unless you drive your car like a race car driver.:) Anyway I have included 4 small holes at the bottom of the knob in case you want to secure it with a grub screw or cable tie of some kind. Version 1B - My colleague wanted a rounded knob so I made another design. As of 8th March 2016, I have NOT printed and tested this version yet! As of 9th March 2016, my colleague is using version 1B. I would appreciate if you can leave a comment and/or indicate you have printed one of the designs.:) Ver 2B: Depth of internal shaft increased from 80mm to 88mm. Hopefully, it is long enough to allow a grub screw (either M3 or M4) to be used to stop knob from pulled out.