Civic 7th gen Door handle

0 downloads152 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

ABS or ASA for durability in outdoor conditions

Saved part guidance

Strength start

20-30% infill for strength and moderate flexibility

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Higher-heat material; verify location and load

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a door handle replacement/upgrade for the 7th gen Honda Civic, its supposed to be plug and play, print from ABS, because PLA cant last under the temperature. it takes a little bit of effort pushing the spring back inside. and you may need to enlarge a little the hole which holds the door wire(only from the inner side), I did it with my key. both models were tested on front doors, its supposed to be okay on the rear ones too though.