Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Console Tray for 2011-13 Ford Edge
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
My wife has been complaining about the original tray that fits in the console of her 2011 Ford Edge. It is difficult to insert and doesn't stay in place. Plus it is too small and doesn't do a good job of containing coins. This console tray is offered as a replacement. I printed it on a MakerBot Replicator 2 - took about 8 hours to print. It was printed with supports, in order to ensure that the top rail prints properly. The bottom corners tend to lift a bit, although that doesn't seem to effect the use or appearance. I could place shields around my printer to minimize this effect. The tray should fit perfectly in a Ford Edge console. However, it will have a tendency to slide forward in the console. To prevent this, I placed some Velcro tape on the inside of the console, just in front of the tray. If you don't have Velcro tape available, almost any tape would work, although you might need several layers to obtain the desired thickness.
Compatible Vehicles
Originally published on thingiverse.com by Thomas Fehring (ThomF) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
