Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Corvette C3 Cupholder
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill for stability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I made this cup holder for a 1969 Corvette Stingray (C3). It mounts to the center console using two already existing screws. It does not interfere with the handbrake. It's a pretty snug fit, and with the screws tightened, it's very stable. I designed it to hold a general variety of containers, eg. a 33 cl. can, but specifically to perfectly fit a Bodum thermos. I printed it in one piece, upside down without supports. Note that the holes for the mounting screws are offset slightly to the back, i.e. closer to the back than to the front when properly mounted. UPDATE: I have to share the Fusion360 file for your convenience. https://a360.co/2ZzjbqQ Follow the link and you will be able to download the model in a variety of file formats.
Compatible Cars
Originally published on thingiverse.com by Anton Dons (Addons) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
C7 Corvette Cut Holder
Corvette C5 Cup Holder Upgrade
2008 CORVETTE CUP HOLDER LINER
Corvette C7 Cup Holder Insert
Better C7 Corvette Cupholder Divider
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
