embase_v1.STL

STL

2.4 MB

fixation_usb.STL

STL

230.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

45g

Based on 25% main infill for the largest likely-needed model file

Material cost

$1.07

Filament only at roughly $24/kg PETG / ASA

Print time

1.3h–2.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
embase_v1.STL	Printable file	2.4 MB STL	41g $0.99	45g $1.07	98g $2.35	Ensure a strong adhesion to the print bed to prevent warping
fixation_usb.STL	Printable file	230.0 KB STL	16g $0.38	17g $0.42	38g $0.91	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dacia Spring adaptateur accoudoir

0 downloads12 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

Adaptateur pour accoudoir standard Se fixe sur la console centrale de la dacia psring.

Published Jul 4, 2026Updated Jul 4, 2026

Originally published on thingiverse.com by didier didier (kawa18) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.