Files (2)

Hijet-CupHolder.stl

STL

1.1 MB

Hijet-CupHolderBase.stl

STL

238.1 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Cup Holders

Daihatsu Hijet Cup Holder

0 downloads73 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA for durability in a car environment, TPU for flexibility as used by the designer

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight, with 2-3 walls for stability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

The older Japanese mini trucks don't have cup holders and there isn't much space to add one. I wanted a large cup holder that would secure small cans, takeout drink cups and a large 32 ounce thermos or hydroflask. I designed this simple cup holder with no moving parts to mount using a single 6 mm bolt to the left of the center console. It's a friction fit against the lower center pedestal of the dash. The cup holder fingers bend outward slightly for large (80+ mm) containers. The hydroflask shown is 91 mm in diameter. Smaller containers such as soft drink cans do not engage the fingers, but are loosely contained by the fingers. The fingers must be able to bend. ABS or maybe PLA might work. I used a firm durometer TPU filament. I've also included the FreeCAD (FCStd) file for those who would like to modify the design, as well as the STL and FCStd files for just the base for those who would like to design a mount for something else - a different style cup holder, a RAM mount, a GPS mount, a ham radio mount, etc.