Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Interior

Daihatsu Mira / Cuore L276 Innenraumfilter Pollenfilter cabin air filter

0 downloads51 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Since my Daihatsu Cuore(in some places called Mira) wasn't equipped with a pollenfilter, i buoght one and made this cover. This is what i did: 1. get an airfilter with the correct size. Size is roughly 176mm x 186mm x 30 i bought a "Filter, Innenraumluft - 1 987 432 173 BOSCH " for 10€ 2. Cut out the the space behind the glovebox. keep the cut out piece 3. insert the air filter 4. place some foam wrap around the cut out plastic part to airtighten it. then stick it back in place and cover it with the 3d printed part to hold it in place.