Dash Cam Mount for FHD 1080P and alike

Final update: I had to redesign the arm and the holder due to the odd shaped mirror arm (it slipped out). The v2 parts fit perfectly and are very very stable. You do not need to remove the mirror to fit it. This is a holder for the Chinese FHD 1080P Car Cam Corder (dash cam) and alike. I wanted a holder which attaches to the reverse view mirror arm so it can hide the camera. The mount also features a ball design so it can be adjusted easily. It is designed for a Passat 2006 B6 model but should be able to work on other models, i have included the original drawing files if you want to make modifications to it. Please note: 1. For a better fit the nut needs to be scaled up by 1% the stl file already has that but not the drawing files. 2. The arm is designed 2 mm shorter on purpose so when attached to the camera it will pull from the side (hence why it looks skew on the picture) i wanted to be more secure as it can get quite bumpy on some roads and i don't trust the Chinese hold mount (it does fit very snugly so it should be ok, just me being paranoid). Parts Required: 1 x Hex Socket Cap m3 x 28mm 1 x M3 nut As usual i have included the 123dx file and a step(.stp) export.