Files (2)

2021_F150_Dashboard_Phone_Clip.STL

STL

46.2 KB

2021_F150_Dashboard_Phone_Clip_V2.STL

STL

48.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2021_F150_Dashboard_Phone_Clip.STL	Clip	46.2 KB STL	Slice file	Slice file	Slice file	Ensure the clip's mounting area is clear of debris for proper attachment to the dashboard bezel.
2021_F150_Dashboard_Phone_Clip_V2.STL	Clip	48.1 KB STL	Slice file	Slice file	Slice file	Ensure the clip's mounting area is clear of debris for proper attachment to the dashboard bezel.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dashboard Phone Clip 2021 F-150

0 downloads55 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

2 hosted model files

STL

Material

PETG or ASA for durability in a car environment

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between strength and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I wanted to mount my iPhone close to center of the dashboard. This Design Clips to the bezel around the Center Screen and it's easily removable. I'm constantly taking it on and off since I only use it to stop my kids from crying (aka showing videos). It can be used with any double sided mounting hardware that is 2.25" X 1.375". In this case I used a magnetic mount that can rotate. 12-5-22 = Added version 2 (V2) that changes the angle. The change in angle makes it easier to snap in and out.