Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Diptyque Car Diffuser
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG
Saved part guidance
Strength start
20-30% infill for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
My wife was the fortunate recipient of this Diptyque car diffuser as a gift. It smells very nice and has a very nice design and is very expensive for what it is. Unfortunately it is designed to fit on a vent flap that doesn't exist on the front of her Tesla Model 3. I used the spacer insert from the previous remixed phone holder design and quickly added a prong for the diffuser to hug onto. I made the spacer a little bit shorter as when I printed it to prototype, it raised the dashboard on top a bit too much for my liking. Don't buy this car diffuser because even though it smells nice and looks cool, it's ridiculously expensive. But if you happen to own one, and a Model 3. This is for you. Probably better in PETG but I printed it in PLA because it's still winter here.
Compatible Cars
Originally published on thingiverse.com by James Teow (urbanvanilla) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 Vent Cover
Tesla Model 3 Febreeze Vent Clip
Tesla Model 3 Footwell Vent Adjuster
2005 Mercedes C240 Vent Tablet Mount
Golf IV (mk4) 52mm boost gauge vent mount
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
