Dodge Center Wheel Cap - Durango Dakota Ram
Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
When the 3rd of 4 OEM wheel caps fell out of my 2003 Dodge Durango, I felt that this would be a fun 3D project to take on. This design has a slightly raised ram emblem on it, and is rounded similar to the original design. I think you'll agree that this looks a ton better than the empty hole I had (and see all over town). I hope it helps you out as well. I printed some successfully without rafts, but my final ones all had rafts as the black filament I was using wasn't adhering to the hot bed as well as the white prototypes. 1) I have the bottom connected in a ring to make it more solid during printing, once removed, you need to cut the small connection between the tabs so they can flex as they're pressed into the wheel opening. 2) I printed in black (other colors could be interesting... neon anyone?) and painted that raised ram image with a metallic paint, and then clear coated the entire cap prior to popping into the wheel of my truck. These fit my 2003 Dodge Durango. Per postings on the internet, they should fit other vehicles as well... (I cannot guarantee, so print one and try it).
Compatible Vehicles
Originally published on thingiverse.com · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
