Dodge Challenger Cell Phone Mount - image

Files (3)

Car_Arm.stl

STL

192.0 KB

Cell_phone_mount_base.stl

STL

71.9 KB

Challenger_car_cell_phone_mount.stl

STL

186.2 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

3 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Phone Mounts

Dodge Challenger Cell Phone Mount

0 downloads60 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

3 hosted model files

STL

Material start

PETG or ASA for durability in a car environment

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

My 2016 (might fit other years not sure) Dodge Challenger cell phone mount. The Challenger has no real good place to put a phone. I used one of those vent mounts for past few years, but that blocks AC from the car. This mount is just enough out of you way and only really blocks the tune button, which can be done from the touch screen. Enjoy. I used the following magnetic mount for mine. https://www.amazon.com/gp/product/B0742GTSX4/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 Sorry I am not very good at making things look sexy. If anyone wants to play with the design, please do. UPDTATE: On request I gave an option to print the cell phone holder in two pieces. I have not actually printed this so I am not sure how it will fit. The hold is scaled up.5 so it should fit together easy, but will need to be glued to make it rugged. The files are in the download, stl pic not coming up due to issue with Thingiverse.