ECO Button Holder for Renault Clio - image

Files (2)

drilled.stl

STL

100.6 KB

filled.stl

STL

94.3 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Knobs/Buttons

ECO Button Holder for Renault Clio

0 downloads94 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill for durability, with 1.2-1.6 mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Engine-bay exposure — use rated material or OEM

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

If you own a last generation Renault Clio, you must know that there is a hidden feature that you can unlock by itself. A button that allows you to put the car in ECO mode, lowering the power and fuel consumption on long journeys. you can see the installation of a standard button in this video. https://www.youtube.com/watch?v=lSSiZ8hzTz8 but the standard button is expensive and difficult to find, so you can print a housing and then connect the button you like. 3D files include a housing where you can add the right hole for your button and a pre-drilled for a standard 16mm panel button. you need a "momentary" button that closes the contact between the two terminals only when it is pressed and not that gets stuck. because you have to press once to activate the eco mode and once to turn it off. if you want to add a little 'style, you can choose a button with integrated LED, because the electrical connections of the hidden arrangement under the plastics includse the power to light up the button when you turn on the headlights in the night link for an example button: http://www.ebay.it/itm/White-Angel-Eye-Metal-LED-Momentary-16mm-Black-Push-Button-Switch-12V-SPST-/ There are three electrical connections (ignore the 4th), you can see them in photographs and drawings, black is the Ground of the car, white is the signal for the button and the blue is the voltage. If by mistake you make in touch the black and blue will have to change a fuse. you need a 150 ohm resistor because the LED (in my case) is at 12V, while withe the engine on the car battery voltage is up to 14.3V +if you don't have the black cable, you can connect to avery metal part of the car, nut and screw for example other info here: http://favremod.altervista.org/modalita-eco%C2%B2-montaggio-tasto/?doing_wp_cron=1485692793.4285740852355957031250 PS: the button works like a charm, no damage or risk for the car, but I do not know if it void the warranty. if you need to bring the car in an official workshop, I suggest to remove the button.