EXTRA SMALL key case for Renault Megane 4, Talisman, Kadjar, and Espace 5 key cards. - image

Files (1)

renault_mini_key.stl

STL

219.1 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Mechanical/Functional

EXTRA SMALL key case for Renault Megane 4, Talisman, Kadjar, and Espace 5 key cards.

0 downloads107 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA for durability

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Hi! This is an extra small key case that fits the Renault Megane 4, Talisman, Kadjar, and Espace 5 key cards. I bought a Talisman but the key is just way to big! Its bigger then my phone. Also it doesn't come with a hole to hang it on my key chain. Its like the idiots at Renault want you to hate them. Just check out the difference with a normal Renault car that has the same options [Image-0.jpg] So i decided to slim down the key as much as possible without any soldering. Follow these simple instructions: 1- Take of the back cover to expose the white inner cover. [Image-1.jpg] 2-Remove the black battery lid and remove the battery. 3- Carefully pry off the white plastic cover to expose the PCB underneath. [Image-2.jpg] 4- Remove the PCB, and remove the metal frame from the buttons by pushing on them.[Image-3.jpg] 5-Click the PCB back on the part with the buttons. Insert the battery and put on the XS mini case. [Image-4.jpg] 6-Enjoy your new small key!