Files (5)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
F250 Badge
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
The side badges for 99-07 Ford F250 Created in Fusion 360 V1.0 The First version of the side badges which was designed to mimic a 1999-2004 F250 badges V2.0 The second version of the badges which was designed to mimic the 2005-2007 F250 badges V3.0 A third version is in the works to be a DIY light-up badge that is similar to the Recon badges that are no longer offered for the 99-07 F250s Printing V1.0 and V2.0: Orientation - For the best result print the badge vertically (As it would sit on the truck) such that the layers are horizontal when the badge is mounted Resolution - 0.2mm or 0.1mm the thinner they layer height, the less work will be needed to make the badge look better after printing; however, the badge will take a long time to print Bed Adhesion - I had the best luck printing on a raft that was 3 layers thick and starting with the bed temp at 65c then lowering it to 50c after the first layer Supports - "Tree" supports worked well for printing the model vertically Printing V3.0: *Will BE UPDATED WHEN MODEL HAS REACHED ITS FINAL FORM*
Compatible Vehicles
Originally published on thingiverse.com by Thomas Campbell (tomiscampbell) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
