Files (4)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Fiat 500 Abarth Euro Tail Light Panel
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Converting the U.S. style Fiat 500 tail lights to the Euro version is a popular modification. The lights themselves are expensive enough, but center panels for these lights sell for around $150 which seems excessive to me. My first generation panel was a simple panel with a cutout for the Abarth Scorpion logo. I used the outline of an Abarth Scorpion logo posted by MiguelBi for the pattern. This is the version shown in the photographs. Unfortunately, it leaves some poorly supported parts of the scorpion which will no doubt warp over time. So the second generation, which are the files included here, consists of two parts. The base with the raised scorpion logo along with an overlay. The two pieces should be glued together, producing a more robust panel. Attach the panel to the tail lights with several pieces of two-sided tape. I like 3-M automotive trim tape. I printed the overlay in E-Sun warm white which is a close match for my car's body color. I printed the scorpion logo in E-Sun fire engine red because the accent details on my car are done in red. Suit yourself on what colors to use. I printed the overlay panels on a textured sheet which produced a nice surface finish.
Compatible Vehicles
Originally published on thingiverse.com by Bob (Mozella) · License: CC BY-SA
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
