Fiat seat console cover back (OEM part# 60911739) - repair part for lower hook

0 downloads51 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for strength and minimal weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

It's easy to break the lower hooks during disassembly of the cover - especially on the first attempt, when you not know where to pull and where to push. This part fixes a broken hook for a fraction of the cost of a new cover. The stump of the broken hook needs to be prepared as shown in the pictures: - the rest of the hook needs to but cut flush - 3 mm of the small bar directly over the hook needs to be removed The part is designed to fit flush, I had to push it in with some force. I used a drop of CA on the small faces of the hook - just enough to hold in place, but still possible to remove the part entirely should it break again.