Fiesta ST AccessPort V3 Mount

0 downloads58 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a mount for use with the Ford Fiesta ST. It is a two-piece print that utilizes the cradle that is included with the AccessPort V3. This print took a lot of tweaking to get the fit perfect for my vehicle so it may not fit properly since all printers are slightly different. Try increasing or decreasing the overall scale of the print a few percent if it doesn’t fit properly the first time. The arm will be the trickiest print but isn’t too bad, use custom supports as shown in the gallery if possible to save some material.