Ford Bluetooth Microphone Cover for Pioneer Microphones - image

Files (1)

Ford_Bluetooth_Mic_Mount.stl

STL

568.7 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Interior

Ford Bluetooth Microphone Cover for Pioneer Microphones

0 downloads87 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA for durability

Saved part guidance

Strength start

20-30% infill for a balance between weight and strength

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

When installing an aftermarket Pioneer stereo head unit in my Ford Taurus, I wanted to use the OEM microphone location with the microphone that came with the head unit. This cover snaps into the OEM location and provides a mounting ball socket for the microphone to snap into. I suggest taping or covering the top somehow to avoid noise from within the headliner cavity. I used this YouTube video as inspiration for the design: https://youtu.be/_GO2Zyr7Ecg According to my research, this part should fit the following vehicles: - Ford Explorer 2011-2015 - Ford F-150 2013-2014 - Ford F-250 Super Duty 2013-2016 - Ford F-350 Super Duty 2013-2016 - Ford F-450 Super Duty 2013-2016 - Ford F-550 Super Duty 2013-2016 - Ford Fiesta 2014 - Ford Taurus 2013-2018 - Lincoln Mark LT 2013-2014 - Lincoln MKS 2013-2015 - Lincoln MKT 2013-2019.