Ford Explorer (5th Gen) Speaker Spacers
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
Source link only
No hosted model files
Material start
PETG or ASA for durability and heat resistance
Saved part guidance
Strength start
High infill density (80-100%) with 3-5 walls for strength
Saved part guidance
Orientation / supports
supports likely, verify in slicer for optimal orientation
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Made because off the shelf spacers for the 5th gens dont work for the 2016-2019 explorers. You will need supports touching build plate. I have a split version and a full front door spacer so that you can fit it on your build plate. i just used super glue to put them together, then hot glue around the seam to seal it. there is clearance for weather strip on the back and behind the speaker. I used a.8mm nozzle to print. Use plenty of walls and top and bottom layers.
Compatible Cars
Originally published on thingiverse.com by tyler davidson (hmnityty) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
