Earn money selling original 3D car part models.
Start sellingEarn money selling original 3D car part models.
Start sellingEarn money selling original 3D car part models.
Start selling
Reference shelf
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
RT3DI have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update 02/23/22: Added a jacket to fit around the outside of the wiper tube along with fitting inside, this will prevent the part from spinning. Feedback from the community, I adjusted the tolerances for the base to fit inside the wiper base. Added 4 additional models, ST Logo, Blank, Standard Wiper, and optional funnel. Increase the screw length of the caps Update 02/25/22: Update the “ FordFocus2012_WindshieldWiper_v3_Base_Revised_v1.stl ” Increased thread tolerances for certain printers. Added v2 models if needed. Update 03/01/22: Fixed thread alignment, simulation was set up incorrectly. Logos will align with the notch on the base. See attached photo. Updated files: FordFocus2012_WindshieldWiper_v3_Cap_Revised_v2.stl FordFocus2012_WindshieldWiper_v3_Ford_ST_Logo_Cap_Revised_v2.stl Update 03/24/22: Updated the funnel to be a little thinner and use less material FordFocus2012_WindshieldWiper_v3_Optional_Revised_v2.stl Note: Best to install when the car is warm. Also, v2 parts are not compatible with v3, I had to rebuild the threads. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: FilamentOne PETG Notes: No support is needed.
Originally published on printables.com by RT3D · License: CC BY
Browse categories
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Most specific car + model + year + category matches first, with popular parts mixed in.
Other projects by us
Building tools that make life easier
Start a fitment, printing, or design discussion with this part already attached.
