focus_keyfob_mount_MK1.stl

STL

232.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

38g

Based on 100% main infill across listed model files

Material cost

$0.92

Filament only at roughly $24/kg TPU

Print time

1.1h–1.8h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	TPU 20%	TPU 100%	100% solid	Recommendation
focus_keyfob_mount_MK1.stl	Mount / bracket	232.6 KB STL	16g $0.39	38g $0.92	38g $0.92	Use a slow print speed for better layer adhesion and quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

ford focus mk1 key mount immobiliser keychain replacement (flexible)

0 downloads5 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

iv'e created a new one cause the old one broke:/ My version fits like a glove. Material: TPU infil 100% print speed: 40 2 slower layres.

Published Jul 10, 2026Updated Jul 10, 2026

Originally published on thingiverse.com by Rafal Walkowiak (komarluj) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.