Ford Focus MK3 (2012) Can / Cup holder for 330cl / 500ML / 16oz

0 downloads52 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

So i have a Ford Focus MK3 (2012) and with monster cans being top-heavy an opened can could (and has) fallen over into a seat during a corner. For this purpose I have remixed inconnel's to fit a regular 330ML Can / 500ML Can. According to the internet, the cans are supposed to be 67mm in Diameter but i found that to be too tight. So the inner diameter of the holder is 68mm. I also gave it sloped sides so when you are driving you don't have to be accurate when trying to put the can in the holder. Due to the can bottom shape and the printed shape it will 'align' automatically and slide right in. I would love it if you could Reply / Post a make or leave a like!