Ford Focus ST 2015+ Front Badge
Files (3)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
A Ford badge made to replace the front bumper badge of a 2015+ focus st. I made it after I bought a new bumper for a front-end conversion. It was supposed to be temporary but it's been over a year and it's still solid in place. I printed the badge with the ford logo on the top and the pin side on the bed. I think this makes the in-set letters easier to print. Shouldn't really need support for the edge but they wouldn't hurt. Print the pins with the flat tip on the bed. After printing, use some sort of liquid adhesive (glue, epoxy) to attach the pins to the badge. Middle pin in the middle, others on the sides. (I didn't end up using the side pins but they might be useful) Check the holes in your bumper to determine how to orient the pin clasps. (they go vertically so the long sides of the pin should be perpendicular to the logo) The pins are primarily for alignment on the bumper. To attach the badge to the bumper, use some thin double-sided tape or any other form of adhesive you're comfortable with.
Compatible Vehicles
Originally published on thingiverse.com · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
