Ford_Maverick_Console_Tray.stl

STL

261.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

18g

Based on 25% main infill across listed model files

Material cost

$0.44

Filament only at roughly $24/kg PETG / ASA

Print time

31m–52m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Maverick_Console_Tray.stl	Primary model	261.0 KB STL	17g $0.40	18g $0.44	40g $0.95	Ensure the print bed is level and clean for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford Maverick Center Console Tray

0 downloads12 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

Real simple print. Uses approximately 128g of filament. Recommend PETG for the heat that can accrue in vehicles.

Published Jul 7, 2026Updated Jul 7, 2026

Originally published on thingiverse.com by Trent Futral (tfutral51) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.